Proudly Designed and Made in USA
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
EU PAT. EP2761064-0001, US PAT. D771218
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
ACCESSORIES INCLUDED
T25 Torx Wrench
SADDLE HEIGHT (IN) 0.59
SADDLE HEIGHT (MM) 15
WARRANTY Lifetime
NO. OF PIECES 2
MATERIALS Aluminum/Steel
COLOR(S) Black
QUICK-DETACHABLE No
PARTS INCLUDED T25 Torx Wrench
MOUNT TYPE Picatinny
HEIGHT PROFILE Medium
OPTIC TO MOUNT TORQUE VALUE (IN-LB) 25
MOUNT TO RAIL TORQUE VALUE (IN-LB) 45
SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) 59
WEIGHT (OZ) 2.6 / 5.2
CENTER HEIGHT (MM) 30
INNER DIAMETER (MM/IN) 30 mm
INNER DIAMETER (MM/IN) 30 mm
RING WIDTH (MM) 22
SADDLE HEIGHT (IN) 0.59
SADDLE HEIGHT (MM) 15
Proudly Designed and Made in USA
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
EU PAT. EP2761064-0001, US PAT. D771218
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
ACCESSORIES INCLUDED
T25 Torx Wrench
SADDLE HEIGHT (IN) 0.59
SADDLE HEIGHT (MM) 15
WARRANTY Lifetime
NO. OF PIECES 2
MATERIALS Aluminum/Steel
COLOR(S) Black
QUICK-DETACHABLE No
PARTS INCLUDED T25 Torx Wrench
MOUNT TYPE Picatinny
HEIGHT PROFILE Medium
OPTIC TO MOUNT TORQUE VALUE (IN-LB) 25
MOUNT TO RAIL TORQUE VALUE (IN-LB) 45
SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) 59
WEIGHT (OZ) 2.6 / 5.2
CENTER HEIGHT (MM) 30
INNER DIAMETER (MM/IN) 30 mm
INNER DIAMETER (MM/IN) 30 mm
RING WIDTH (MM) 22
SADDLE HEIGHT (IN) 0.59
SADDLE HEIGHT (MM) 15
